|
Product Details:
|
| Terminal:: | 2.0 Copper Strip Terminal | Tube:: | 2.0 PTFE Heat Shrinkable Tube |
|---|---|---|---|
| Product Name: | Silicon PTC Thermistor Temperature Sensor | Temperature Measurement Range: | -40-125 Degrees |
| Model: | KTY83-120 | Material: | Silicon Single Crystal |
| High Light:: | Silicon KTY83-120 PTC Thermistor, Copper Strip Linear Ptc Thermistor | ||
| Highlight: | Single Crystal Thermistor,Positive Temperature Single Crystal Thermistor |
||
PTFE coated silicon PTC thermistor temperature sensor KTY81 KTY83 KTY84 KTY10 620MM
KTY83-120 Positive Temperature Coefficient Silicon Single Crystal Thermistor Lithium Battery Temperature Control PTC The
1. Description of silicon PTC thermistor temperature sensor
Silicon PTC thermistor temperature sensor KTY84-150-620TW is made of chip KTY84-150 and is compatible with KTY83-1KΩ series. The chip is soldered to the PTFE cable UL1332 26AWG TS Black through 2.0 copper bus terminals, and then encapsulated with 2.0 PTFE heat shrink tube for a compact design. It has the characteristics of fast response, long-term stability and good consistency. "Silicon material positive electrode" temperature coefficient "KTY series thermistor and temperature sensor" is suitable for "drive motors and control motors". The main models include KTY84-130, KTY84-150, KTY84-151 and KTY84-152. The sensor The lead length and color can be customized.
2.Typical Application Of The Silicon PTC Thermistor Temperature Sensor
Motion control temperature sensor, temperature sensing and controls in drives and motors, spindles, inverters and control systems, etc.
Industrial automation control equipment.
Home appliance temperature detection and compensation.
Precision circuit and crystal oscillator temperature compensation.
Temperature compensation of silicon semiconducting devices.
Temperature compensation of instrumentation amplifier.
A/D converter temperature compensation.
Micro motor timing control.
Automobile temperature detection and control.
Medical equipment temperature detection and control.
Linear PTC thermistors applications also include transmission, engine oil and coolant, heating system, overheating protection, amplifiers, power supplies, transducers, telemetry, computers, magnetic amplifiers, thermometry, meteorology, temperature regulation and over-temperature protection.
3. Dimension Of The Silicon PTC Thermistor Temperature Sensor (unit:mm)
| Serial number | Material name | Specifications / Models | Texture of material |
| 2-1. | LEAD WIRE | UL1332 26AWG TS Black(OD1.0±0.1mm) | PTFE |
| 2-2. | TERMINAL | 2.0 Copper strip terminal | |
| 2-3. | TUBE | 2.0 PTFE heat shrinkable tube | |
| 2-4. | THERMISTOR | R25=580Ω±40Ω | LK-KTY84-150 |
4. Specification Of The Silicon PTC Thermistor Temperature Sensor
| Serial number | Item | Test Conditions | Min. | Nor. | Max. | Unit |
| 3-1. | Resistance At 25℃ |
Ta=25±0.05℃ PT≦0.1mw |
540 | 580 | 620 | Ω |
| 3-2. | Resistance At 100℃ |
Ta=100±1℃ PT≦0.1mw |
950 | 1000 | 1050 | Ω |
| 3-3. | Insulation test | 100VDC | 100 | / | / | MΩ |
| 3-4. | Withstand voltage test |
1250V AC 2mA In still air |
5 | / | / | Sec |
| 3-5. | Operation Temperature Range | / | -40 | / | +150 | ℃ |
| 3-6. | Rated Current IN | / | / | 2 | / | mA |
| 3-7. | Max Current Imax | / | 8 | mA | ||
| 3-8. | Thermal Time τ | In still air | / | / | 7 | S |
| 3-9. | Dissipation factor δ | In still air | 1.5 | / | / | mW/℃ |
| 3-10. | Rated Power Pmax | / | / | / | 50 | mW |
5. R-T Characteristic Parameter Table Of The Silicon PTC Thermistor Temperature Sensor
| Celsius | Fahrenheit | LK-KTY84-150 | ||||
| ℃ | ℉ | %/(K) | (Ω) | (K) | ||
| MIN | TYP | MAX | ||||
| -40 | -40 | 0.97 | 294 | 322 | 350 | ±8.85 |
| -30 | -22 | 0.94 | 327 | 356 | 385 | ±8.76 |
| -20 | -4 | 0.91 | 361 | 392 | 423 | ±8.7 |
| -10 | 14 | 0.88 | 397 | 430 | 463 | ±8.65 |
| 0 | 32 | 0.87 | 434 | 469 | 504 | ±8.61 |
| 10 | 50 | 0.85 | 475 | 512 | 549 | ±8.58 |
| 20 | 68 | 0.82 | 517 | 556 | 595 | ±8.55 |
| 25 | 77 | 0.80 | 540 | 580 | 620 | ±8.54 |
| 30 | 86 | 0.79 | 562 | 603 | 644 | ±8.53 |
| 40 | 104 | 0.78 | 610 | 653 | 696 | ±8.5 |
| 50 | 122 | 0.75 | 659 | 704 | 749 | ±8.46 |
| 60 | 140 | 0.73 | 711 | 758 | 805 | ±8.42 |
| 70 | 158 | 0.67 | 768 | 814 | 860 | ±8.37 |
| 80 | 176 | 0.63 | 827 | 873 | 919 | ±8.31 |
| 90 | 194 | 0.62 | 887 | 935 | 983 | ±8.25 |
| 100 | 212 | 0.62 | 950 | 1000 | 1050 | ±8.17 |
| 110 | 230 | 0.62 | 1011 | 1068 | 1125 | ±8.66 |
| 120 | 248 | 0.58 | 1077 | 1138 | 1199 | ±9.17 |
| 130 | 266 | 0.52 | 1148 | 1209 | 1270 | ±9.69 |
| 140 | 284 | 0.51 | 1215 | 1282 | 1349 | ±10.24 |
| 150 | 302 | 0.50 | 1279 | 1352 | 1425 | ±10.8 |
6. Features Of The Silicon PTC Thermistor Temperature Sensor
1. KTY84 temperature sensor chip, the structure is based on the principle of diffusion resistance, with a true approximate linear temperature coefficient, ensuring high accuracy of temperature measurement. (The temperature changes from -40°C to +180°C, and the resistance value changes approximately linearly from about 300Ω to 1600Ω.)
2. KTY84 temperature sensor chip, based on "silicon batch processing technology", has good product consistency and strong interchangeability."
3. KTY84 temperature sensor chip, the main component is silicon, silicon is inherently stable, so it has extremely high reliability and extremely long service life (it has very little drift in up to 50 years, repeating its characteristics for millions of times The curve remains unchanged.)
4. KTY84 temperature sensor chip, the electrode is a Ni-Sn composite electrode, which has high reliability and good solderability.
5. KTY84 standard components are DO-35 glass packaging structure with axial leads. The structure is firm, the electrode contact is stable, and it can be used in harsh environments such as high temperature, high humidity and extreme cold. The appearance is standardized, and it has a small size and fast response. advantage.
6. The KTY84 temperature sensor is packaged and connected with PTFE leads and heat shrinkable tubes, and can withstand temperatures above 200°C. The resistance and leads are connected by copper tape riveting.
7.Silicon Sensors Application Precaution Of The Silicon PTC Thermistor Temperature Sensor
Minimum lead wire length tailored to shall be ≥8mm.
In lead wire bending, bending point shall be more than 2mm away from glass body part.
8.Mounting and Handling Recommendations
Excessive forces applied to a sensor may cause serious damage. To avoid this, the following recommendations should be adhered to:
No perpendicular forces must be applied to the body
During bending, the leads must be supported
Bending close to the body must be done very carefully
Axial forces to the body can influence the accuracy of the sensor and should be avoided
These sensors can be mounted on a minimum pitch of >5 mm
9.Soldering and Welding
Avoid any force on the body or leads during, or just after, soldering.
Do not correct the position of an already soldered sensor by pushing, pulling or twisting the body.
Prevent fast cooling after soldering.
For hand soldering, where mounting is not on a printed-circuit board, the soldering temperature should be <300C the soldering time <3 s and the distance between body and soldering point >1.5 mm.
For hand soldering, dip, wave or other bath soldering, mounted on a printed-circuit board, the
soldering temperature should be <300C, the soldering time <5 s and the distance between body and soldering point >1.5 mm.
The distance between the body and the welding point should be >0.5 mm. Care should be taken to ensure that welding current never passes through the sensor.
﹡KTY types and LPTC types are all DO-35 precision glass sealed
﹡Our company undertakes the production of various sensors using the above components
﹡To facilitate installation, our company can undertake products of the same type and specifications with one-way lead plastic packaging components
﹡The company's research, development and production of silicon thermistors and sensors with various special parameters and structural forms
Different wire lengths can be customized, and the following specifications can be processed:
Model: KTY83-110 KTY83-120 KTY83-121 KTY83-122 KTY83-150 KTY83-151 KTY83-152
KTY83-110 R25℃=1000Ω ±1% operating temperature -40℃~175℃
KTY83-120 R25℃=1000Ω ±2% operating temperature -40℃~175℃
KTY83-121 R25℃=990Ω ±1% operating temperature -40℃~175℃
KTY83-122 R25℃=1010Ω ±1% operating temperature -40℃~175℃
KTY83-150 R25℃=1000Ω ±5% operating temperature -40℃~175℃
KTY83-151 R25℃=975Ω ±2.5% Working temperature -40℃~175℃
KTY83-152 R25℃=1025Ω ±2.5% Working temperature -40℃~175℃
Factory real shot display:
A Positive Temperature Coefficient (PTC) Thermistor is a type of thermistor that has a positive temperature coefficient, meaning that its resistance increases as the temperature increases. It is commonly used as a temperature sensor in a variety of electronic devices. Our PTC Thermistor, with the model number LK-KTY84-150, is a high-quality and reliable product designed to meet your temperature sensing needs.
Our PTC Thermistor offers a wide range of features and benefits, making it a top choice for temperature sensing applications:
PTC Thermistors are widely used in a variety of electronic devices and systems. Our PTC Thermistor with the model number LK-KTY84-150 is suitable for the following applications:
Our PTC Thermistor is available for purchase through our authorized distributors. Please refer to the product code LK-KTY84-150 when placing your order.
In conclusion, our PTC Thermistor is a high-quality and reliable product designed to meet your temperature sensing needs. With its positive temperature coefficient, 50mm tube length, 2.0 copper strip terminal, output type wire type with three cores, and R25=580Ω±40Ω resistance, it offers accurate and efficient temperature measurement for a wide range of applications. Don't hesitate to contact us for more information or to place your order.
| Product Name | Silicon PTC Thermistor Temperature Sensor |
|---|---|
| Tube | 2.0 PTFE Heat Shrinkable Tube |
| Cable Length | 620mm |
| Sensing Thermistor | LK-KTY84-150 |
| Output type Wire type | Three Cores |
| Cable | UL1332 26AWG TS Black PTFE |
| Resistance | R25=580Ω±40Ω |
| Tube Length | 50mm |
| Terminal | 2.0 Copper Strip Terminal |
| High Light | Silicon KTY81 PTC Thermistor, Copper Strip Linear PTC Thermistor |
Brand Name: lin kun
Model Number: Silicon PTC Thermistor Temperature Sensor
Place of Origin: China
Output type Wire type: (three Cores)
High Light: Silicon KTY81 PTC Thermistor, Copper Strip Linear Ptc Thermistor
Terminal: 2.0 Copper Strip Terminal
Cable Length: 620mm
Product Name: Silicon PTC Thermistor Temperature Sensor
A PTC Thermistor is a type of temperature sensor that exhibits a positive temperature coefficient. This means that as the temperature increases, the resistance of the thermistor also increases. This makes it ideal for temperature measurement, control, and compensation in a variety of applications.
The Silicon PTC Thermistor Temperature Sensor from lin kun is a high-quality product that can be used in a wide range of industries and environments. Some of the most common applications include:
The Silicon PTC Thermistor Temperature Sensor from lin kun has several key features that make it stand out in the market:
The Silicon PTC Thermistor Temperature Sensor from lin kun is a versatile and reliable product that can be used in a wide range of applications. With its high accuracy, stability, and durability, it is the ultimate temperature sensor for any industry or environment. So, whether you need to measure, control, or compensate for temperature, the PTC Thermistor is the perfect choice!
Brand Name: Lin Kun
Model Number: Silicon PTC Thermistor Temperature Sensor
Place of Origin: China
Cable: UL1332 26AWG TS Black PTFE
Terminal: 2.0 Copper Strip Terminal
Output type: Wire type (Three Cores)
Tube Length: 50mm
Product Name: Silicon PTC Thermistor Temperature Sensor
The PTC Thermistor is packaged in a sturdy cardboard box with foam padding to ensure safe transportation. Each box contains a set of 10 thermistors, individually wrapped in anti-static packaging to prevent damage during shipping.
The box is labeled with the product name, quantity, and specifications for easy identification. Additionally, a packing slip is included inside the box for reference.
The PTC Thermistors are shipped via a reliable courier service, such as UPS, FedEx, or DHL. The shipping cost will be calculated based on the destination and weight of the package.
For international orders, all necessary customs documents will be included to ensure smooth customs clearance.
Customers can also choose to use their own shipping account for the delivery of their order.
Once the package is shipped, customers will receive a tracking number to monitor the status of their delivery.
For urgent orders, expedited shipping options are available for an additional fee.
With our careful packaging and reliable shipping methods, you can be assured that your PTC Thermistors will arrive safely and in a timely manner.
Contact Person: Ms. Huang
Tel: 13423305709
